[BeagleBoard] Beagle Battery Module in Production

UPDATE This module has been produced; see here: CLICK There is no really good battery for the Beagleboard that can really deliver the juice with efficiency, let alone for a good price. That is why, i made this ~3″ x 3″ [10x10cm] board that can take up to four Lipo battery modules, with four independent charging fast-charging circuits for all four batteries. You have to use at least two batteries, max four, from small ones of 300mAh to big fat 6000mAh’s. It also includes a microprocessor that monitors the batteries health, and shows through four RGB LED’s, and a temp sensor. Also, this info can be requested through the USB port, so that the Beagle board knows the exact battery status. They have multiple power outputs over USB so you can use it on more shields like this [i am developing some at the moment, prototypes of cellphone, GPS and radio modules are in production as well as we speak]. Anyway i wanted to share the newest board i made, you can see the board and schematics below. I currently have 10 in production as prototype. I only want to keep 2. The other 8 are for sale for $5 each. $5? Yes, five dollars, so that i make a $3 profit. The boards are nice and red and include the white silkscreen. Ofcourse you have to solder and mount (&buy) the components on them yourselves – a good hour of work. I will include a BOM. Also, of course there is a possibility they do not work at all, hence, “prototype bΓ¨ta”.

[caption id="attachment_1150" align="aligncenter" width="300" caption="Top"][/caption] [caption id="attachment_1149" align="aligncenter" width="300" caption="Bottom"][/caption]

Schematics

[caption id="attachment_1158" align="aligncenter" width="300" caption="Schematic"][/caption] FYI: this module will be used on the SpaceCamera Live project due to launch in november [see right menu button]]]>

You may also like...

10 Responses

  1. Henk Schoemaker says:

    Hallo Tim, ik volg dit project met aandacht en wil graag een board van je afnemen.
    Ik hoor graag van je.
    Succes met je project.
    Groeten Henk

  2. German Viscuso says:

    I want one!! πŸ™‚ Can you send it to Spain and I pay you via PayPal?
    Best.
    German

  3. Maksym Parkachov says:

    Hi Tim,
    good job, that’s exactly the module I was looking for. If you could send two of them to me (Germany) it would be great. I could pay with PayPal.
    Thanks,
    Maksym.

  4. Tim says:

    They have arrived, look good and fit exactly on the BeagleBoard xM itself. Tonight ill be soldering a sample.

  5. JL says:

    I would be interested in 2 of these if you actually still have them around. Please send me an email. Thanks πŸ™‚

  6. PYM says:

    Hi Tim !
    Good job dude, that’s exactly the module I was looking for my project πŸ˜‰
    The same order for me πŸ˜‰
    If you could send two of them to me (Germany) it would be great. I could pay with PayPal.
    Thanks,
    Pierre (FRA)

Leave a Reply

Your email address will not be published. Required fields are marked *